19 gauge galvanized tie wire Tw1061t for Max Twister

 19 Gauge Galvanized Twist Tie Wire1. TW1061T is used exclusively for tying rebar with a MAX TwinTier RB441T.2. Double the speed, Cost savings, shorter tie Height, save time and tying wire length.3. Wire length: 33-34m double wire.4. Wire diameter: 1.0mm.5. Weight per roll: 0.45 kgs.6. Ties per Coil: 170

Featured Products

 

19 Gauge Galvanized Tie Wire Tw1061t for Max Twister

19 Gauge Galvanized Twist Tie Wire

1. TW1061T is used exclusively for tying rebar with a MAX TwinTier RB441T.

2. Double the speed, Cost savings, shorter tie Height, save time and tying wire length.

3. Wire length: 33-34m double wire.

4. Wire diameter: 1.0mm.

5. Weight per roll: 0.45 kgs.

6. Ties per Coil: 170-260



Product Description:
 

Model No.:19 Gauge Galvanized Tie Wire
Diameter:1.0MM
Length:33-34m double wire.
Net weight: 0.45kg/ reel  
Material Code:Galvanized Wire, Black Annealed Wire,olyester Coated Wire
Applicable machine:Max RB441T.
Wraps per Tie: 1
Tensile Strength:55,800-81,300(lb/in²)
19 Gauge Galvanized Tie Wire Tw1061t for Max Twister
19 Gauge Galvanized Tie Wire Tw1061t for Max Twister

 

TIE WIRE MATERIAL:

CarbonManganPhosphorusSulfur
0.13-0.18%0.60-0.90%less than 0.03%less than 0.035%


KYA rebar tie wire is made of the ideal grades of carbon steel and stainless steel to suit the environment they must endure.

The rebar tie wire is drawn and dead soft annealed to create the greatest possible ductility which provides a tough but pliable wire which is easy to twist but hard to break.

 

BLACK ANNEALED

This low carbon steel, dead soft annealed wire is coated with a black oxide finish to provide a thin, mildly corrosion-resistant finish. This commonly used wire meets most construction, precast, and pre-stressed concrete industry applications.

ELECTRO-GALVANIZED

This low carbon steel, dead soft annealed wire is finished with a 5-micron zinc coating to provide greater corrosion resistance. It is ideal for precast or pre-stressed concrete used in marine or other harsh environment applications, or where length of service is important.

PLASTIC COATED

This low carbon steel, dead soft annealed wire is powder-coated with .05mm thickness of yellow polymer (polyester). It is used when tying epoxy coated rebar or other DOT mandated uses, or anywhere a cushioned wire with added protection against corrosion or abrasives is needed.

19 Gauge Galvanized Tie Wire Tw1061t for Max Twister

Rebar Tie Wire TW1061T For Max Binding Machine RB441T

Wire Diameter 1.0MM.

Also Called Doule tie wire for Max tool, and tying wire with two head.

Advantage: Double the speed, Cost savings, shorter tie Height, save time and tying wire length.

Faster, stronger, and easier to handle.

It helps reduce costs and shortens the time required for construction.

The wire height has been reduced by 50%.


Rebar Tie Wire - 21 Gauge Galvanized

Model No.:Rebar Tying Wire Spool for Max Rb 397 398 399
Diameter:0.8MM
Length:100M
Net weight: 0.4kg/ reel  
Material Code:Q195, Galvanized Wire
Applicable machine:MAX RB392,395,397 and 213
Wire Tensile Strength420m/Pa
Wire Yield Strength:330m/Pa
Resistance against rust:It should be no rust by 4cycles times under instructed test conditions
Tensile Strength:42-47 KG/CM2
Elongation:21%
Wire length for one knot:50-40cm.One reel can tie 120 to 190knots 
19 Gauge Galvanized Tie Wire Tw1061t for Max Twister
19 Gauge Galvanized Tie Wire Tw1061t for Max Twister



Usage:

1) Precast concrete products,
2) building foundations,
3) road and bridge construction,
4) floors and walls,
5) retaining walls,
6) swimming pool walls,
7) radiant heating tubes,
8) electrical conduits.




19 Gauge Galvanized Tie Wire Tw1061t for Max Twister



:
19 Gauge Galvanized Tie Wire Tw1061t for Max Twister
19 Gauge Galvanized Tie Wire Tw1061t for Max Twister
19 Gauge Galvanized Tie Wire Tw1061t for Max Twister




Why choose KYA?

1.Short production time:Our company have established the strong partner-ship with over 100 factories and We have our own factory.

2.Reasonable prices and High quality:Quality and prices are our focus because we know what you will care at most.

3.Satisfactory after-sales service: Middle time production report with photos will be sent to you and also reconfirm accomplished date. We will establish close contact with you.Any problem you will get reply at the first time.

4.Free samples: Free samples available at any time.

You can get competitive prices from us because we possess big manufacturing relationship in China.


Company Information:


19 Gauge Galvanized Tie Wire Tw1061t for Max Twister



Contact Us:

19 Gauge Galvanized Tie Wire Tw1061t for Max Twister






 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours